Synthesis of lithium mangan dioxide (LiMn2O4) for lithium-ion battery cathode from various lithium sources
Ginting, N R
MetadataShow full item record
LiMn2O4 as a cathode material has been synthesized via solid state reaction. The synthesis has been done by varying lithium sources such as LiOH.H2O and Li2CO3 while MnO2 was used as Mn sources. All raw materials were mixed stoichiometrically to be the precursors of LiMn2O4. The precursors were sintered using high temperature furnace at 800 ºC for 4 hours in atmospheric condition to form final product. The final products were sieved to separate the finer and smoother particles from the coarse ones. The products were characterized by X-Ray Diffractometer (XRD) to identify phases and crystal structure. The peak wave number was also determined using Fourier Transform Infra Red (FTIR) to find functional group. LiMn2O4 sheets were prepared by mixing active material with polyvinylidene fluoride (PVdF) and acetylene black (AB) in mass ratio of 85:10:5 wt.% in N,N-Dimethylacetamide (DMAc) solvents to form slurry. The slurry was then coated onto Al foil with thickness of about 0.15 mm and dried in an oven. LiMn2O4 sheet was cut into circular discs and arranged with separator, metallic lithium, and electrolyte in a coin cell. Automatic battery cycler was used to measure electrochemical performance and specific capacity of the cell. XRD analysis showed that sample synthesized with Li2CO3 has higher crystallinity and more pristine than sample synthesized with LiOH.H2O. FTIR analysis revealed that both of samples have identical functional group but sample with Li2CO3 source tend to degrade. Cyclic voltammetry data gave information that sample with LiOH.H2O source has better electrochemical performance. It showed double oxidation/reduction peaks more clearly but sample with Li2CO3 source has higher specific capacity (64.78 mAh/g) than sample with LiOH.H2O (50 mAh/g).
Showing items related by title, author, creator and subject.
Pengaruh Komposisi Dan Ketebalan Katoda LiMn2O4 (Lithium Mangan Oksida) Pada Kapasitas Baterai Ion Lithium Sari, Tri Mala (2016-02-23)Telah dibuat lembaran katoda LiMn2O4 dari campuran serbuk LiMn2O4, Super P, PVDF serta pelarutnya DMAC sebanyak 60 ml dengan menggunakan variasi komposisi dan ketebalan dimana variasi komposisi yang digunakan adalah 85:10:5 ...
Pembuatan Material Anoda Lithium Titanate (Li4Ti5O12) dan Studi Pengaruh Ketebalan Elektroda Terhadap Performa Elektrokimia Baterai Ion Lithium Dhika, Mia Aulia (2016-12-07)Telah dilakukan pembuatan serbuk Li4Ti5O12 dan studi pengaruh ketebalan terhadap performa elektrokimia baterai ion lithium. Li4Ti5O12 disintesis dari bahan baku LiOH.H2O dan TiO2 dengan metode metalurgi serbuk. Lembaran ...
Fabrikasi Lithium Titanate Terdoping Al (Li4Ti4,975Al0,025O12) dan Studi Pengaruh Ketebalan Lembaran Elektroda pada Sel Setengah Baterai Ion Lithium Marpaung, Giassanistya Fadillah (2017-01-13)Sintesis serbuk dan pembuatan lembaran anoda Li4Ti5O12 doping Al (x=0,025) telah berhasil dilakukan. Sintesis serbuk LTO doping Al dilakukan dengan metode solid state sedangkan pembuatan lembaran anoda dilakukan dengan ...